Paxson Lim, Author at Electric Skateboard HQ

June 15, 2025June 27, 2025 by Paxson Lim

Meepo V3 Max Review – Maximum value

We all know that Meepo made plenty of considerations in this 2025 version of their entry-level electric skateboard. We know this because we first reviewed the prototype, which then had its ESC changed, had its wheels changed, and had its motor upgraded.

And, at the end of the day, two numbers will probably define the board: the $454 price tag and the 324Wh battery.

But we are getting ahead of ourselves here. As usual, let’s run through the specs.

Meepo V3 Max Specs:

Price	$469 (with ESHQ15)
Battery	12S3P 324Wh battery
Controller	LingYi ESC
Top Speed	28 mph (45 km/h)
Range	20 miles (32 km)
Deck	8 ply maple + 1 ply bamboo veneer
Motor	2 x 800W (full magnetic hub)
Weight	19.8 lbs (9 kg)

Deck – 8 ply maple + 1 ply bamboo veneer:

Starting with the deck, Meepo V3 Max uses a 38” deck made from 8 layers of Canadian maple with 1 ply of bamboo veneers. It is a bit on the stiffer side, with only a very mild flex to it. And it has a modest concave profile, nothing too crazy here.

The V3 Max has a handle cut-out, as most entry-level electric skateboards do, which, again, while making the board look cheap, is actually infinitely convenient.

As per standard, tail guards are included even for budget electric skateboards now.

ESC – LingYi ESC:

Next, after dabbling with their own JK ESC, Meepo went back to Ling Yi ESC for this one. Which means the same old 4 speed modes and 4 brake modes that can be set independently of each other, meaning no smart power-on but push to start, where the board automatically powers on once it starts rolling.

This year’s Meepo does come with a new color remote, named M6C Remote, though, which is simple but fairly nice looking. But wait, this Ling Yi ESC has some new tricks up its sleeves too—it does allow advanced customization of each speed mode, so if the pro mode is too strong for you, you can always tone it down to your liking.

Battery – 12s3p 324Wh battery cell:

And beside the ESC enclosure, we have the highlight of the board—the 12s3p 324Wh battery cell. 12s3p for less than $500 is pretty much unheard of before this. For context, Meepo themselves were selling the V3 Extended Range at $599 previously. And the Extended Range series was using a smaller 288Wh battery.

Surveying across major electric skateboard brands, you will see that Meepo very intentionally priced this year’s V3 Max series to have the biggest pack in this price range.

This battery is marketed to go 20 miles (32km) in a single charge, and our 165lbs (75kg) test rider managed to get 19.5 miles (31km) riding fast.

Motors and Wheels – 800W dual hub motors and 90-94mm wheels???:

Another number that drew our attention was the 800W dual hub motors. While motor wattage never tells the full story on a motor’s power, rarely does an entry-level electric skateboard have motor wattages above 600W.

Between the prototype and production board, Meepo also upgraded the hubs from a half magnetic to a full-magnetic system, which should be better in performance and heat dissipation.

The V3 Max was marketed to go up to 28 MPH (45kph), which we had no problem reaching.

And the torque was pretty strong. We live in the world of belt drives now, so even the strongest hub motors wouldn’t have blown us away. But we can say that these hub drives have enough torque to make you not miss belt drives.

It can do steep hills without breaking a sweat. And Ling Yi ESC Pro mode made sure that you get your thrills of being rocketed forward when at full throttle from a standstill.

Fun fact: Did you know why Meepo named the board V3 Max instead of moving forward with V6, after already making V5? This is because V3’s over-the-top torque and thrill were so groundbreaking at that time that V3 is still a fan favorite to this day. That’s why Meepo was so insistent on keeping their V3 boards powerful with both the previous V3S and now the V3 Max.

What they began to do, for the first time, was to have mismatched sizes for the front wheels vs the back wheels. The front wheels of the Meepo V3 Max are both smaller at 90mm and narrower at 60 mm as compared to the back wheels, which use hub sleeves of 94mm and are 66mm wide.

The thicker back wheels reduce road vibrations through the stiff hub motors up to your leg, and wider back wheels give better grip. This actually does improve the riding experience, slightly, as one of the most frequent complaints of hub boards is how stiff the back wheels are and how badly they grip due to the stiffness.

I’m sure you could imagine a 2mm difference between front and back wheel height isn’t noticeable in any way, but it remains a mystery to us why Meepo doesn’t just make the front wheels 94mm too. Probably to save cost to hit that under $500 price tag, but we’re just guessing here.

For those who hate mismatching wheels, do know that the wheels are compatible with Cloudwheels, and the board certainly is powerful enough to drive bigger wheels—we know, we tried the 105mm prototype.

Trucks – Standard 7-Inch Reverse Kingpin Trucks:

As for the trucks, Meepo went with standard 7-inch reverse kingpin trucks with double barrel bushings. There isn’t much to be said about Meepo’s Shredder trucks—they are pretty good, pretty balanced between responsiveness and stability. It’s not as precise as the top-tier branded forged trucks, but it is easy to turn, fun to carve, and stable at top speed. You can’t ask for more from a budget board.

The back trucks on the V3 Max series are new and improved, though.

Usually, the back trucks are “press-fit” hub motors, which look like this—it actually relies on a bunch of screws to hold it to the “pseudo truck”.

And now, the back trucks are full axle, which look like this:

While we haven’t heard there were problems with the previous back truck, the new full axle hub motors would give us better peace of mind when it comes to mechanical stability.

Riding Experience of the Meepo V3 Max:

Speed control on the Meepo V3 Max is as smooth as it comes—intuitive. Thanks to the responsive trucks, carving around is fun. And the board gives you enough power to accelerate up to top speed with a push of the throttle. The acceleration remains strong at high speed all the way up to the top speed—we always feel like the board has enough muscle to go faster.

The ride is slightly smoother and slightly less vibrative compared to other versions of hub wheels, thanks to its meatier back wheels. It’s a marginal difference, frankly, but we are always happy to see attempts at improvement, however minor.

Verdict on the Meepo V3 Max:

To put it simply, until the competition catches up, the Meepo V3 Max is not only the board to get for electric skateboards under $500, but also for anyone considering getting their first electric skateboard, regardless of the budget.

A 12s3p at a price below $500 is hard to come by and if it does, they won’t be as put together as well as the Meepo V3 Max, with its full-axled rear trucks and powerful hub motors.

Good board at a great price. Period.

If you are interested in buying the Meepo, be sure to check out our affiliate discount link here and use code: “ESHQ15” to receive $15 off during checkout.
It will help you get a small monetary discount and help us out too. On top of that, you’ll be tagged as an Electric Skateboard HQ customer and probably be treated better. Cheers!

June 4, 2025June 4, 2025 by Paxson Lim

Uditer Pixel Rider Review – Hey! It is actually a good electric skateboard!

The Uditer Pixel Rider might just be the most visually striking electric skateboard we’ve ever reviewed. Its standout feature? A fully customizable LED deck powered by the iPixel app. Users can choose from a variety of preset animations—or better yet, upload their own designs for a more personal touch. While the default graphics may not be to everyone’s taste, the ability to tailor the visuals gives it a creative edge.

But let’s be honest—cool lights alone won’t cut it. Priced at $425, the Uditer Pixel sits squarely in the entry-level category, where competition is fierce. To justify its place beyond novelty, it needs to back up the flashy visuals with solid performance.

So, let’s get into the specs, they actually looks promising.

Uditer Pixel Rider Specs:

Price	$425 (after $50 off with ESKATEHQ50)
Battery	10S3P 328Wh 7.8Ah
Controller	LingYi ESC
Top Speed	28 mph (45 km/h)
Range	20 miles (32 km)
Deck	Canadian maple + fiberglass composite
Motor	2 x 600W Hub motors
Weight	26.5lbs (12kg)

Deck – Canadian Maple and Fiberglass Composite:

Starting with the deck, this LED deck measures 38” and is made from Canadian Maple and Fiberglass. To no surprise, it’s completely stiff, and because of the embedded LED components, it’s also entirely flat. Not our favorite characteristic for a skateboard deck, but an unavoidable tradeoff to make the LED feature happen.

The good news is that the deck’s surface remains grippy despite lacking traditional grip tape. It feels like clear rubber placed over the LEDs, providing excellent grip, so no complaints here. The deck looks quite ordinary when the LEDs are off, similar to Cinderella after midnight, so you’ll likely keep them on all the time, which brings us to the battery.

Battery and ESC – 10S3P 328Wh 7.8Ah and LingYi ESC

Photo of Uditer Pixel Rider esc enclosure

Photo of Uditer Pixel Rider battery enclosure

To sustain the LED display, the Uditer Pixel Rider packs a respectable 10s3p battery with 328Wh and 7.8Ah capacity, which is above-average for boards under $500. To top it off, the battery is easily swappable, which gets a thumbs up from us.

The board is marketed to reach a 25-mile (40 km) range per charge, but realistically, you should expect about 18 miles (29 km) if you ride aggressively with the LEDs on.

Our only minor nitpick is the appearance of the battery enclosure, though the practicality of the swappable feature outweighs aesthetic concerns. I’m also not a fan of the orange silicone seals, but I’ll forgive this, as they provide an IP55 waterproof rating for the electronics.

Next to the battery enclosure is the ESC. It uses a LingYi ESC, featuring the familiar 4-speed modes and 4 independent brake modes. There’s no smart power-on feature, but it includes push-to-start functionality. The remote it uses is familiar. It’s nothing fancy but gets the job done.

Trucks – 8-inch reverse kingpin trucks:

Next, Uditer equipped the board with standard 8-inch reverse kingpin trucks. Nothing extraordinary here, but they’re decent. Although they lack the precision of premium trucks, they handle high speeds and carve adequately. Impressively, these are forged trucks rather than the less durable cast trucks typically found on boards under $700.

Motors And Wheels – Dual 600w Hub Motors And 105mm Wheels:

For the motors, the Pixel Rider comes with dual 600W hub motors. These are pretty big numbers, and while motor wattage never tells the full story about a motor’s power, most entry-level electric skateboards typically have motors rated below 600W.

It has a modest top speed of 28 mph (45 km/h), which we had no problem reaching.

Uditer also equipped the Pixel Rider with 105mm Cloudwheel clones, another pleasant surprise for a board priced under $500. The board definitely needs this cushioning, considering the completely stiff deck and hub motors. With 105mm wheels, road vibrations are still strong but considerably tolerable. It would’ve been a lot worse and borderline unrideable if it’s on 90 mm.

Riding Experience of the Uditer Pixel Rider:

Overall, the Pixel Rider provides a decent ride.

The LingYi ESC gives a smooth and intuitive control, though it didn’t come with the same punch and torque typically associated with LingYi systems. Which is also expected as this is a 10s setup instead of a 12s setup, and big wheels take away torque.

The dual 600W motors aren’t exhilarating but are sufficient to drive the 105mm wheels uphill comfortably. We didn’t actually feel anything amiss while riding the Pixel Rider; nothing felt lacking in the riding experience.

It offers a well-rounded ride, as any good entry-level electric skateboard should, without being particularly impressive in any aspect, which is also typical of most entry-level electric skateboards.

Verdict on the Uditer Pixel Rider:

Coming into this review, I was fully expecting the Uditer Pixel Rider to be a gimmicky board that would force buyers to choose between style and actual substance.

Then, we looked under the hood and found ourselves pretty impressed by the substance this $425 board brings to the table: a 10s3p swappable battery, forged trucks, and 105mm wheels. Even without the gimmicky LED deck, the Pixel Rider actually offers plenty for its price.

It also helps that the board delivers a riding experience that’s on par with any board under $500.

So, here’s our verdict: if you fancy yourself a board with an LED deck, go for it. And in case you’re worried about the brand, fret not—Uditer has been around for years now. They used to have some really … unusual products…, like the Uditer W3 back in 2021, but it’s good to see they’ve grown past that!

If you are interested in buying the Backfire, be sure to check out our affiliate discount link here and use code: “ESKATEHQ” to receive $50 off during checkout.
It will help you get a small monetary discount and help us out too. On top of that, you’ll be tagged as an Electric Skateboard HQ customer and probably be treated better. Cheers!

April 25, 2025April 25, 2025 by Paxson Lim

Veymax Merlin Review – Best Value Mid-range Electric Skateboard

Today, we’re taking a look at the Veymax Merlin, a $649 belt-driven electric skateboard from the emerging brand Veymax.

The mid-tier market, that being of boards priced between $500-$800, is pretty crowded, and already features popular boards like the Meepo Flow, Wowgo Pioneer X4 and Tynee Ultra. So, the Merlin has its work cut out if it wants to stand out from the crowd.

Check out our review of the Wowgo Pioneer X4.

But first, let’s dive into the specs.

Veymax Merlin Specs:

Price	$649
Battery	12S2P Samsung 21700 50S, 432Wh
Controller	LY-FOC 8.0
Top Speed	30 mph (48 km/h)
Range	29 miles (46 km)
Deck	2-ply Canadian maple, 2-ply fiberglass, 2-ply bamboo
Motor	Dual 1400W belt-driven motors

Deck – 2-ply Canadian maple, 2-ply fiberglass, 2-ply bamboo

Starting with the deck, Merlin’s deck is made with 2-ply Canadian maple, 2-ply fiberglass, and 2-ply bamboo and measures 37.8” long and 9.8” wide. Its flexibility is moderate — not quite as flexible as the Meepo Envy or Pioneer X4, but comparable to the Meepo Voyager. The deck provides decent comfort and enough concave to keep your feet secure.

Battery – 12S2P Samsung 21700 50S, 432Wh

Beneath the deck is a 432Wh battery in a 12S2P configuration. But what stands out here is the battery cells, in which Veymax has opted for top-tier Samsung 21700 50S cells. These cells are highly rated for their high capacity, strong continuous discharge, and minimal voltage sag, making them popular among premium boards. Besides, it’s pretty rare to see Samsung 50s in a $600 board.

This setup claims a range of up to 29 miles (46 km) per charge, which is quite a bit higher than its direct competitors.

ESC and Remote – LY-FOC 8.0 with Standard LingYi remote:

In the other enclosure, you’ll find the Merlin sports a LingYi-FOC 8.0 ESC. This choice surprised us, as Veymax previously used Hobbywing ESCs in their Mini Monster. Brands that typically select LingYi ESCs are often going for a punchier, more aggressive ride feel, sometimes at the cost of smoothness and precise throttle control found in Hobbywing ESCs.

Another trade-off here is the lack of smart turn-on; however, the LingYi ESC in Merlin features push-to-start functionality in which you simply roll the board forward to power it on. The Merlin ships with a standard LingYi remote, which isn’t particularly exciting, but it has always worked reliably.

Motor – Dual 1400W Belt Driven Motors:

The Merlin is powered by dual 1400W belt-driven motors. 1400W stands pretty average among the competition, delivering a top speed of 30 mph (48 km/h), which is also a pretty average number. These motors do bark louder than most belt motors, though.

And they’re not just loud for the sake of it. The combination of LingYi ESC and the 1400W motors gives very strong acceleration from a standstill. You really have to press your foot down firmly if you want to go full throttle in the highest speed mode.

Another thing we appreciate about the Merlin is that it keeps that strong acceleration even at 20 mph. You can continue to accelerate all the way up to top speed without feeling a power drop-off. It’s a satisfying feeling—being able to summon more power with a flick of the throttle, even when you’re already moving fast.

Another plus with this ESC and motor setup is the braking behavior. LingYi ESCs usually give stronger brakes, and that’s the case here. Where Hobbywing ESCs tend to feel weaker toward the end of braking—just before coming to a stop — the Merlin with its LingYi ESC is fully capable of stopping and locking the motors.

Most seasoned riders prefer this kind of braking response, though of course, it’s a matter of personal preference.

Trucks – 8” 45 degree Reverse Kingpin Trucks:

Veymax has equipped the Merlin with 8-inch, 45-degree reverse kingpin trucks which isn’t particularly special. They’re solid, stable at speed, and still responsive enough to make carving fun. Overall, they seem designed for high-speed riding, thanks to their stability.

Wheels – 90mm 78A Polyurethane Wheels or 105mm Cozy Wheels:

The Merlin comes standard with 90mm 78A polyurethane wheels, with an option to upgrade to 105mm Cozy Wheels for just $30 more. Personally, I would’ve gone for the 105mm setup, especially since we have pretty rough roads where we are.

The Merlin clearly has enough torque to drive bigger wheels anyway. Veymax ships the 90mm setup with a 36T pulley, giving a 2.4:1 gear ratio, and ships the 105mm setup with a 40T pulley to maintain strong torque with a 2.6:1 gear ratio.

That said, the 90mm wheels on our review unit were fine too. In fact, they feel slightly softer than most 90mm wheels, so riding them on rough pavement is still manageable.

Veymax Merlin Specs Summary & Verdict:

Honestly, the $500–$700 price segment is pretty uninteresting for a reviewer like us. Unlike the sub-$500 category, where it’s all about making trade-offs to hit a low price, or the premium category, where we get wowed by over-the-top features, most boards in this range are just plain, well-rounded electric skateboards. And the Merlin fits that description.

What Veymax Merlin does offer, though, is a slightly better battery, stronger torque, and more power than its competitors—boards like the Tynee Ultra Belt, Meepo Flow, and Wowgo Pioneer X4. Veymax is probably hoping that edge is enough to sway buyers toward the Merlin.

In that sense, we usually approach newer e-skate brands with some skepticism, but this isn’t the first Veymax board we’ve reviewed—we also tried the Mini Monster—and both times, the results have been solid. That gives us a bit more confidence that Veymax can keep up with the competition and is likely here to stay.

All in all, if you’re looking for a Boosted-style electric skateboard with solid power, the Veymax Merlin is a board we can recommend. It’s one of the good ones—no complaints here.

If you are interested in buying the Veymax, be sure to check out our affiliate discount link here and use code: “ESKATEHQ” to receive 5% off during checkout.
It will help you get a small monetary discount and help us out too. On top of that, you’ll be tagged as an Electric Skateboard HQ customer and probably be treated better. Cheers!

April 25, 2025April 25, 2025 by Paxson Lim

Tynee Explorer Pro Hub Review – Best Powerful Hub All Terrain

Not many brands dare to make high-end hub-driven all-terrain electric skateboards, as people came to expect anything more than $1000 to come with a belt or gear drive system. In fact, the Backfire Ranger X5 was the only worthwhile mention in this category until Tynee decided to make this $1,299 Tynee Explorer Pro.

The Tynee Explorer Pro did come with both belt and hub version, but we will be reviewing the hub version today.

As usual, let’s run through the specs

Tynee Explorer Pro Hub Specs:

Price	$1,299
Battery	14S4P 1008Wh Samsung 50S battery
Controller	14S Hobbywing ESC
Top Speed	31 mph (50 km/h)
Range	50 miles (80 km)
Deck	Multi-layer composite of Canadian maple, bamboo, and fiberglass
Motor	Dual 2500W Hobbywing hub motors

Deck – Multi-layer composite of Canadian maple, bamboo, and fiberglass:

Starting with the deck, it measures 38” long and 10” wide. What makes the Tynee Explorer Pro Hub unique is that it uses a multi-layer composite deck made from Canadian maple, bamboo, and fiberglass, which makes for one of the most flexible decks on an all-terrain setup, with a flex level akin to the Backfire Ranger X5.

This is also a drop-down deck, as is almost always the case with AT boards, to keep the ride lower and more stable. Tynee also added 3mm padded shock-absorbing grip tape to cut down on vibrations. The deck has some good concave, which is nice. We hate flat decks here.

ESC and Battery – 14S Hobbywing ESC and 14S4P 1008Wh Samsung 50S battery:

Photo of Tynee Explorer Pro Hub esc enclosure

Following the deck build, the electronic enclosure is also just as flexible which allows the deck to flex naturally with it. Inside, there’s a 14S4P battery and a 14S Hobbywing ESC. The Hobbywing ESC isn’t a surprise—every Tynee board comes with one—but opting for a 14S configuration instead of 12S is an interesting choice. At the very least, it shows an intention to provide as much voltage as possible to drive torque, compensating for the lack of gear reduction in a hub motor system. For context, most setups get by just fine with a 12S configuration.

The Explorer Pro also uses high-quality Samsung 50S cells, adding up to 1008Wh of battery capacity. And for the more energy-efficient hub version, Tynee claims a range of 50 miles (80km) on a single charge, while the belt version, which is less energy-efficient, is marketed to go 37 miles (60 km) on a single charge.

The Explorer Pro also comes with the standard Hobbywing remote. From there, you can tweak some settings, like speed profiles, top speed, etc. Alternatively, you can also use the mobile phone app for advanced customization.

Motors and Wheels – Dual 2,500W Hobbywing hub motors and 7” (165mm) airless all-terrain wheels:

Photo of Tynee Explorer Pro Hub hub motors

Powering the Tynee Explorer Pro Hub is a pair of 2,500W hub motors. While numbers aren’t everything, the fact that these are the highest-wattage hub motors we’ve seen in the market speaks volumes.

Interestingly, the hub setup comes with smaller 165mm airless wheels, which slightly lowers the top speed in contrast to the belt setup, which uses 175mm pneumatic wheels. The hub version tops out at 31 mph (50 km/h), while the belt version can reach 37 mph (60 km/h).

We’re guessing Tynee chose to trade top speed for better acceleration when opting for smaller wheels on the hub version to boost low-end torque, especially during takeoff. In all honesty, it was the right call because the Tynee Explorer Pro takes off strong.

You really have to brace yourself and press against the deck if you go full throttle from a standstill—otherwise, you’re getting thrown off. Besides good acceleration, the board brakes pretty strongly, too.

We’re pretty impressed that a hub drive can produce that kind of power. Sure, at this price, it’s still a step back compared to powerful belt and gear drives, but for a hub drive? This is impressive.

While belt and gear drive systems are often preferred for their higher torque and aggressive acceleration, hub motors have their own advantages. It’s more power-efficient, which means better range per charge; it requires lower maintenance, since there are no belts to replace or adjust and lastly it’s a quieter operation.

An additional benefit when using hub motors on an all-terrain board is that you don’t have to worry about debris—no sand, sticks, or leaves clogging up the drivetrain. It’s a hassle-free setup that works well for both urban and off-road riding.

Another worry-free option are the 6-inch (165mm) airless rubber tires, which eliminate the need to adjust air pressure or deal with flats. Pneumatic tires may provide a little smoother ride, but they also carry the risk of punctures and pressure loss, which can cause serious problems while riding.

We rode on grass without getting stuck thanks to these tires’ respectable grip.

Trucks – Precision TKP trucks:

As for the trucks, the Explorer Pro uses TKP trucks, which are becoming more and more popular in high-performance builds, instead of the more conventional double kingpin setups.

For those who prefer DKP trucks, Tynee offers a DKP baseplate, allowing riders to swap to a DKP setup if they want. They also offer a lifetime warranty on all their trucks, which is a nice touch.

These TKP trucks perform as expected—more carvy than reverse kingpin trucks but not as extreme as DKP trucks. That also means more stability than DKP, making high-speed riding easier and more reliable.

We can see why Tynee went with TKP trucks here. Since they designed the board for both hub and belt setups, and the belt version can hit 37 mph or 60 km/h, hence prioritizing stability makes sense. Riding the Explorer Pro at 31 mph feels comfortable and controlled, thanks to the extra effort in keeping the board stable.

Tynee Explorer Pro Hub – Specs Summary and Verdict:

To put it short, at $1,299, the Tynee Explorer Pro is a solid value buy.

Take a look at this chart I made for our blog post on the best affordable all-terrain electric skateboards:

You can see that the Tynee Explorer Pro gives you a lot more battery for the price.

I’d assume that hub systems cost less, which frees up more budget for the battery, but then again, the Ranger X5 and the Maxfind FF AT also use hub motors but don’t give you nearly as much juice.

The Tynee Explorer Pro Hub is most obviously comparable to the Backfire Ranger X5. Both have flexible decks, airless wheels, and hub-driven all-terrain boards. Both are excellent for riders who want a comfortable, low-maintenance board that is stress-free. They aren’t ideal for riding on steep mountain routes, but they are decent enough to glide over gravel roads, grass, cracks, and bumps.

The Ranger X5 has more style, thanks to its beautiful lighting, but the Tynee Explorer Pro is notably more powerful. It has stronger torque, a higher top speed, and significantly more range. The Explorer Pro also sits lower to the ground, whereas the Ranger X5 rides a bit higher.

For casual riders who just want a big-wheel board without the hassle, a hub-driven all-terrain board makes a lot of sense. The Tynee Explorer Pro and even the $999 non-Pro version offer exactly what you need—without having to pay a premium tax. This is a board that we can wholeheartedly recommend.

Tynee made its name with powerful premium shortboards, but the Explorer series shows they can do all-terrain longboards just as well. Let’s see if stepping outside of their specialty pays off!

If you are interested in buying the Tynee, be sure to check out our affiliate discount link here and use code: “ESKATEHQ” to receive $5 off during checkout.
It will help you get a small monetary discount and help us out too. On top of that, you’ll be tagged as an Electric Skateboard HQ customer and probably be treated better. Cheers!

April 14, 2025April 14, 2025 by Paxson Lim

Veymax Mini Monster Review

Today, we’re reviewing the Veymax Mini Monster, a $759 electric shortboard from a smaller brand.

Even if you’re unfamiliar with electric skateboards, a quick search will tell you that the electric shortboard market is packed, especially in the $500-$1000 price range. That means the Veymax Mini Monster has its work cut out for it.

But first, let’s run through the specs and see what your $759 gets you.

Veymax Mini Monster Specs:

Price	$759
Battery	403Wh Samsung 40T battery504Wh Samsung 50S battery
Controller	Custom 14S Hobbywing ESC:
Top Speed	32 mph (52 km/h)
Range	28 miles (45 km)
Deck	8-ply Canadian maple and fiberglass
Motor	Dual 3000W belt motors

Deck – 8-ply Canadian maple and fiberglass.

Starting with the deck, the Veymax Mini Monster features an 8-ply Canadian maple construction with a layer of fiberglass.

It’s a pretty typical shortboard deck, measuring 30 inches long and 9.6 inches wide. It has a functional kicktail, which is always a plus. Veymax has also pre-installed a tail puck, a nice touch that wasn’t common a few years ago but is now almost expected.

It also has a mild concave, which is nothing too crazy here.

Battery – 403Wh Samsung 40T or 504Wh Samsung 50S battery:

Next up, let’s talk about the battery. The Veymax Mini Monster comes in two battery variants, so you can choose one that fits your needs and best suits your budget

The $759 standard version comes with a 403Wh battery using Samsung 40T cells. This setup gives a range of 28 miles (45 km), but for an extra $200, you can upgrade to the 504Wh Samsung 50S battery for more range.

What’s interesting is that Veymax decided to follow the recent trend of premium electric shortboards and go with a 14s2p configuration instead of arranging the same number of cells in a 10s3p configuration, which would give the board a higher Ah. This means they would prefer the Mini Monster to have monster power and no voltage sag rather than maximizing the range.

Meanwhile, lesser-known brands that are trying to break into the market often configure their boards with higher AH ratings and range figures, as first-time e-skate buyers tend to focus on numbers on specs sheets —without realizing that power and torque don’t show up on the spec sheet.

So, I’m happy to see Veymax using a 114-volt battery. This at least means that we can take them seriously. Plus, as far as we know, the only other shortboard with a 114-volt battery is Tynee’s flagship, The Tynee Mini 3 Max——and that thing is a rocket.

Motor – Dual 3000W belt motors:

Photo of Veymax Mini Monster belt motors

All that battery power flows into a pair of 5255 3000W motors. These motors are 140KV, and for those unfamiliar, lower KV ratings mean better torque.

The belt-drive system features a 2.4:1 gear reduction.

With a top speed of 32 mph (52 km/h), the Mini Monster isn’t the fastest shortboard out there, but it’s still faster than what most riders would ever need from a board this size.

And the ride performance is pretty much as expected. The combination of a high-voltage 14S battery, large motors, and a 140KV setup gives the Veymax Mini Monster the monstrous torque it was clearly named after. It launches from a standstill very fast, which is an absolute thrill.

However, what’s more noteworthy here is that the board has extraordinarily strong brakes—strong and sharp, stronger than any other electric shortboard that we’ve tested.

Trucks – 8-inch, 45-degree RKP trucks

Veymax uses 8-inch, 45-degree reverse kingpin cast trucks with CNC finishing.

Most electric shortboards use narrower 7-inch trucks unless they are specifically designed for high-speed stability—in which case, they use 8-inch trucks, like the Tynee Mini 3 Max.

We generally prefer wider trucks on shortboards. Wider trucks give a shortboard the stability of a longboard at high speeds, while the shorter wheelbase keeps it agile and easy to turn.

And, of course, you can always kick-turn for the tightest turns.

There’s no way we’d ride a shortboard at 30 mph on 7-inch trucks.

ESC and Remote – Custom 14S Hobbywing ESC:

For the ESC, Veymax went with a custom 14S Hobbywing ESC.

If you’ve ridden a Hobbywing-powered board before, you know what to expect—buttery smooth acceleration and precise braking. It also has a smart power-on feature, meaning the board turns on automatically when you power up the remote.

This ESC also allows for advanced customization, either through the mobile app or directly on the remote.

Wheels – 90 x 60 mm, 78A durometer or 105mm Cozy Wheels

The base Mini Monster has 90mm 78A wheels, while the upgraded version features 105mm PU wheels, which Veymax calls Cozy Wheels. We’re not familiar with these wheels, but larger wheels can be useful or those looking for higher top speeds and better safety on rough roads,

The 90mm 78A wheels are fairly standard—similar to the stock 90mm wheels used by most major brands today.

Specs Summary of Veymax Mini Monster

For mid-market electric shortboards around $759, the Tynee Mini 3 Pro sets the standard.

The Veymax Mini Monster enters the scene with competitive specs but ups the ante with a 14S2P Samsung 40T battery, compared to the 13S2P Molicel in the Tynee Mini 3 Pro.

It seems Veymax is following Tynee’s proven formula of building a torquey and powerful electric shortboard while adding its own small twists—a 14S battery instead of 13S, wider 8-inch trucks, and different wheel options. Tynee does have the Tynee Mini 3 Max, which also features a 14S battery and wide 8-inch trucks, but with the added advantage of forged and CNC-finished trucks and a gear-drive system—though it comes at a higher price of $959.

As you can see, Veymax is taking a lot of inspiration from the two Tynees there.
The main drawback is that Veymax is still a lesser-known brand. However, that’s less of a concern because it uses proven components like Samsung battery cells, a Hobbywing ESC, and Hobbywing motors. The board is also well-built and relatively portable, at 19 lbs (8.6 kg).

Riding experience of Veymax Mini Monster

It’s become a trend to make electric shortboards with extreme torque, and Veymax seems to have gotten the memo.

The Mini Monster rockets off the start line, likely thanks to its low KV motors and high-voltage battery. In fact, it’s the second most powerful shortboard we’ve tested, just behind the $200 pricier Tynee Mini 3 Max. The acceleration is incredibly fast and thrilling—most riders probably won’t go full throttle from a standstill, but just knowing that much power is available at a flick of the throttle is exciting.

To handle the high torque and power, the trucks are configured for straight-line stability out of the box. Perhaps because we are lightweight Asians, it took more effort to lean and get the board turning. We ended up loosening the trucks slightly to make carving easier.

Otherwise, the wider trucks help compensate for the short wheelbase, adding stability at higher speeds.

Aside from that, the other aspect of the ride is pretty standard. The Hobbywing ESC delivers smooth and intuitive speed control, while road vibrations are as harsh as expected from a shortboard with 90mm wheels.

Verdict of the Veymax Mini Monster

The Veymax Mini Monster is a well-built board with specs and a riding experience that holds its own against other shortboards on the market.

It’s a solid choice for those who want more kick and range than a $500 budget board but aren’t ready to shell out $900–$1,000 for a luxury ride. If you’re looking for a little more bite without breaking the bank, the Mini Monster might just be the beast for you.